| ITA | ENG |
Riccardo Frascio S.a.s.
since 1972 cutting professionality and experience.
08/11/2010 M51 SPECIAL HL
High-alloyed materials are extremely demanding on all cutting tools. The M51 special HL provides a cost effective solution for these difficult applications.
M51 Special HL cutting tips together with a special tooth geometry provides the perfect solution for high alloyed and exotic materials.
M51 Special HL is especially suited to cut large cross sections, therefore, the ideal choice for steel service centres, forging mills and where predominantly large material diameters have to be cut.
Precise perpendicular cut with excellent surface finish on the most difficult-to-cut-materials. The doubled-sided chamfered pre-cutter ensures absolute straight cutting, while a pair of lower set finishing teeth keep the cutting channel open. Resulting in a clean and smooth cutting surface.
M51 Special HL cutting tips allow materials with a hardness of 50 HRc (1600 N/mm²) to be cut. Together with an aggressive cutting angle of 16°, it is the ideal combination to cut high alloyed and exotic materials on larger cross sections.
The high thermal and mechanical wear resistance of M51 Special HL cutting tips ensure excellent blade life, when cutting high alloyed and exotic materials. .
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Back to home page.
High-alloyed materials are extremely demanding on all cutting tools. The M51 special HL provides a cost effective solution for these difficult applications.
M51 Special HL cutting tips together with a special tooth geometry provides the perfect solution for high alloyed and exotic materials.
M51 Special HL is especially suited to cut large cross sections, therefore, the ideal choice for steel service centres, forging mills and where predominantly large material diameters have to be cut.
Precise perpendicular cut with excellent surface finish on the most difficult-to-cut-materials. The doubled-sided chamfered pre-cutter ensures absolute straight cutting, while a pair of lower set finishing teeth keep the cutting channel open. Resulting in a clean and smooth cutting surface.
M51 Special HL cutting tips allow materials with a hardness of 50 HRc (1600 N/mm²) to be cut. Together with an aggressive cutting angle of 16°, it is the ideal combination to cut high alloyed and exotic materials on larger cross sections.
The high thermal and mechanical wear resistance of M51 Special HL cutting tips ensure excellent blade life, when cutting high alloyed and exotic materials. .
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Back to home page.
